Daewoo Puma TT2000SY, Twin Spindle, 8 Axis CNC Lathe
Stock Number: 1437
Daewoo TT2000SY
Age: 2004
Condition: Great
(2) Spindles
(2) Turrets
Full Y axis
Fanuc 18iTB
(2) 8" Chucks
(2) 12" Station Turrets
Tool Probe
Full C Axis on both Spindles
(8) Live Milling/Drilling Tool,(5) Straight (3) Right Angle
Chip Conveyor & Parts Conveyor
Cool Jet High Pressure-1,000 PSI
Hours Operating - 11,679
Request a quote on stock# 1437
Equipped With:
MAIN SPINDLE DIRECTION Horizontal
TURNING DIAMETERS.......... NOMINAL:8.300
"...................MAXIMUM:15.400 "
TURNING LENGTHS.............NOMINAL:13.800 ".................MAXIMUM:13.800 "
MAXIMUM SWING .....................................31.500 "
CHUCK DIAMETER..............STANDARD:8.000
"..................MAXIMUM:10.000 "
COLLET TYPE/CAPACITY --
BAR CAPACITY................STANDARD:2.600 "
WORK SUPPORT COMPONENTS
MULTI-SPINDLE: No
NUMBER OF MAIN SPINDLES: 2
HEADSTOCK - SPINDLE 1
NOSE...........................................A2-6
BORE..........................................3.000 "
SPEED..............................................5000 RPM
DRIVE MOTOR (HP).......................29.5
HEADSTOCK - SPINDLE 2
NOSE.................................................A2-6
BORE................................................3.000 "
SPEED.........................................5000 RPM
DRIVE MOTOR (HP)..................................29.5
TOOLING / WEIGHTS / MEASURES TOOLING PRIMARY SECOND TYPE..............Primary:Upper
Turret...............Second:Lower Turret
MAX. NUMBER OF TOOLS
TURNING............Primary:12.................Second: 12
ROTARY.............Primary:12...............Second: 12
TOOL SHANK SIZE (inches)
SQUARE............Primary:1.000"...........Second: 1.000 "
ROUND..............Primary:1.600"............Second: 1.600 "
ROTARY..........Primary:0.750"...........Second:0.750 "
ROTARY TOOLING
HORSE POWER (30 Min).......Primary:7.4...............Second:7.4
RPM.........................Primary:4000.......................Second:
4000
ON-CENTER MILL
DRILL...........................................Standard
WITH 'C'
AXIS..................................................Standard
OFF-CENTER MILL
DRILL..........................................Standard
WITH 'Y'
AXIS..................................................Standard
MAX. NUMBER OF SIMULTANEOUS CUTTING TOOLS: 2
FLOOR LAYOUT:
LENGTH.........................................................159 "
WIDTH..........................................................87 "
HEIGHT.........................................................98 "
company name
street name
city name, state name zip code
phone number
fax number
tina@jmcmachinerysales.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
