Parker Majestic 6" x 18" Hand Feed Surface Grinder
Stock Number: 1311
Parker Majestic 2Z
Serial No. 2873-SCM-73 Age: 1973
Condition: Good
Click to view larger photo
Request a quote on stock# 1311
Equipped With:
Table width and length - 6" x 18"
Maximum height, table top to spindle center 20"
Longitudinal table travel per revolution of handwheel - 3"
One revolution of elevating handwheel causes - 0.10"
spindle to rise
(6) Spindle speeds, via belt change on pulleys
Wheel size - 2,200, 2,800, 3,400, 3,600, 4,300, 6,000 R.P.M.
Wheel size - 7" diameter x 1-1/4" bore x 5/8"
wide
Longitudinal table travel accomplished by a handwheel in conjunction with steel tapes
wound around steel drums. The table moves on flat and "V" type ways which are
hand scraped and rulon coated.
Cast iron construction
Direct drive spindle
All operator's handwheels located at the waist level for ease of operation
Multi-speed spindle system with recessed motor
Motorized elevation/lowering for rapid traverse of the grinding wheelhead
6" x 18" O.S. WALKER fine division electromagnetic chuck with Neutrofier control
Manually operated BIJUR one-shot lubrication system
.17 H.P. 3/60/230-460 volt elevation/lowering drive motor
1/4 H.P. 3/60/220-440 volt coolant pump motor with self-contained tank
1 H.P. 3/60/230-460 volt spindle drive motor and electrical controls
Machine is wired for 230 volt operation.
Approximate Weight - 1800 lbs
Approx Dimenions - 53" L-R x 48" F-B x 72" H
JMC Machinery Sales Inc
11430 Kaltz Ave.
Warren, Michigan 48089
586.756.8855
586.756.8866
tina@jmcmachinerysales.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
